technical data sheet 7/16 surge arrester bulkhead jack - jack 60HK561-K00N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/06.07/5.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-4, vg 95250, en 122190, din 47223 documents panel piercing b 75 assembly instruction 60 x02 material and plating connector parts material plating center contact spring bronze silver, 3-6 m outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet 7/16 surge arrester bulkhead jack - jack 60HK561-K00N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/06.07/5.0 electrical data impedance 50 ? operating frequency 800 to 2500 mhz return loss ? 26 db, 800 to 960 mhz ? 21 db, 960 to 1700 mhz ? 26 db, 1700 to 2400 mhz ? 23 db, 2400 to 2500 mhz insertion loss ? 0.1 db center contact resistance < 0.4 m ? outer contact resistance < 1.5 m ? power handling (at 20 c, sea level, vswr 1.0) 1.8 kw @ 1 ghz rf-leakage ? 128 db @ 1 ghz intermodulation (3 rd order) < -115 dbm @ 2 x 20 w nominal impulse discharge current mult. 40 ka, wave 10/350 ? s mult. 100 ka, wave 8/20 ? s residual voltage < 110 v @ 20 ka, wave 8/20 ? s mechanical data mating cycles min. 500 coupling nut retention ? 1000 n center contact captivation: axial ? 200 n radial ? 2 ncm coupling torque (recommended) 25 to 30 nm proof torque max. 35 nm environmental data temperature range -45c to +85c rapid change of temperature iec 60068-2-14 test na corrosion salt mist iec 60068-2-11 test ka vibration iec 60068-2-6 test fc shock iec 60068-2-27 test ea climatic class iec 60068-1 (45/85/56) cold iec 60068-2-1 test a dry heat iec 60068-2-2 test b damp heat (steady stat e) iec 60068-2-3 test ca degree of protection (mated pair) ie c 60529, ip68 2.5 bar, mated condition rohs compliant weight weight 506 g/pce draft date approved date rev. engineering change number name date a. fellner 15/02/06 sa. krautenbacher 20.03.14 e00 14-0352 t. krojer 20.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to ma ke changes judged to be necessary.
|
